As the weather starts to cool, each year it is important a homeowner make sure their Quality Heater in Wilmington, DE is in good working order for the upcoming season. One of the best ways this can be done is by scheduling a repair person to come to clean and inspect the unit. During this process, the technician can make sure the unit is working in the best and more efficient manner possible.
Most technicians will want to spend time cleaning the unit by first vacuuming the blower portion of the system. This will rid it of any dirt, debris or other matter, which might be inside or outside of the unit. The grilles and vents of the unit will also need to be cleaned using a stiff brush. Most blowers also have an air filter. It will need to be inspected and replaced or cleaned if it is too dirty for air to pass through it properly.
Once the Quality Heater in Wilmington, DE is cleaned, the repair person will want to check the wiring and an electrical connection on the system to ensure the unit is operating in a safe manner. The motor will also be checked and oil will be added to the oil ports if the motor has them. This will help in keeping the bearing inside the motor moving freely. A fan belt connects the motor and the fan. The fan belt should be inspected and replaced if it shows any signs of wear or damage. The fan will also need to be cleaned using a stiff brush. However, if it is damaged or in disrepair, the repair person will generally replace it as well.
The thermostat on the unit will need to be checked to make sure it is switching the unit on or off at the proper times. The technician will also want to calibrate the unit to verify it is reading the temperature in the home properly. This can be done using and infrared thermostat gun. The gun will measure the temperature in the home and this allows the technician to adjust the thermostat to match. The burner will need to be checked as well. This is generally done by turning the furnace on and examining the flames as the light up. If the flames are blue and steady, the burner is in good condition. Otherwise, it will need to be cleaned.
