Several nice features come with the installation of new windows in a home. One of the first features you will notice is the appearance of the home with new windows whether they are wood, vinyl or aluminum. The new windows will have new framing, which may not be large in size, but it will be beautiful and compatible with the window.
Windows are a major source of heat loss. New windows can come with triple-pane glass, and these are up to 74% more energy efficient. These windows can help save up to 31% on the costs of your heating and cooling. Some windows come with snap-in between-the-glass blinds or shades, which further help increase energy savings. The advanced Low-E triple-pane windows are very energy efficient.
The older windows were most often installed with fiberglass insulation between the window frame and the wall. This is always removed when new windows are being installed because there are many new products on the market that can be inserted by a foam gun. The foam product expands, making the window draft proof.
The house frame is inspected from the outside once the window has been removed. The installers are experts at detecting problems with the house frame that might make new Window Installation in St. Paul difficult. After any problem is addressed, the installers will wrap a special material around the window opening. This is a barrier against wind and rain entering the jambs. The material is cut out where the window will go. The rubber pan flashing is installed next, and this may be the most critical part of the installation.
Ideally, the homeowner should look at all of the windows offered at Window Installation in St. Paul to determine which window is right for their home. There are many manufacturers and many materials used to make windows. The windows are made in many styles and with many energy conservation factors.
One prime consideration when buying new windows is to look at the reported energy savings numbers. The “U” rating is the measure of how a product prevents heat from escaping. Often, the Solar Heat Gain Coefficient (SHCG) is combined with the “U” rating. The SHCG measures how much heat from the sun is blocked. The NFRC label is the only window label with information you can trust. You can verify the accuracy of the label by the Certified Products Directory.
