To ensure that your heating system runs more efficiently no matter its fuel source, you need to regularly maintain it. While you should have a professional provide maintenance at least once a year, there are some things that you can do yourself. Here are three maintenance tips for heating systems that use oil.
Test System
Before it starts getting cold and you need to use the heating system, test it to make sure it works properly. Check the level of fuel, which is heating oil in Groton, CT, to make sure that there is enough to test with.
Before turning the system on, make sure that the emergency switch is also set to on and turn up the heat about 10 degrees warmer than the room. Then, after turning it on, listen for the equipment to start and for it to put out heat.
Change Oil Filter
To prevent the nozzle on the heating oil system from clogging, you should change the oil filter once a year. The filter catches impurities that could clog the system and cause it to shut down unexpectedly. When the system is professionally checked, the technician will usually clean the nozzle so that it doesn’t clog and cause the system to stop.
Check Oil Tank
Along with the main heating system, you should also include the heating oil tank in your annual checkups. Look for any signs of damage to the tank and check those areas carefully for leaks. Also, check the tank’s legs and other exposed parts for corrosion. If maintained, the oil tank should last for several decades.
If your system is new, provide some protection for the oil tank from high winds and shards of ice. If you take care of your Groton heating oil system, it should efficiently heat your house and keep it cozy for you and your family for many years.
